ICU and Transport Ventilators: A Buying Guide for Hospitals

Ventilators are bought under pressure more often than almost any other piece of equipment: a new ICU wing, a surge plan, an ambulance service upgrade or a hospital replacing a fleet that the manufacturer no longer supports. The models look alike on a spec sheet, but they differ in the patients they can ventilate, the gas supply they need and how long they can run on battery. This guide covers what to settle before you ask for quotes on a critical care or transport ventilator.

Critical care, transport or non-invasive?

Start with where the ventilator will be used.

The international standards draw the same line. ISO 80601-2-12 covers critical care ventilators, and ISO 80601-2-84 covers ventilators for the emergency medical services environment. Ask the manufacturer or supplier which standard a model was designed to, especially if it will ride in an ambulance or aircraft.

Patient groups

Confirm that the ventilator, as configured, covers the patients you treat. Hamilton Medical, for instance, lists adult/pediatric and neonatal patient groups for the HAMILTON-C1, and marks some features on its spec table as options rather than standard. On many ventilators, neonatal modes, flow sensors and breathing circuits are priced separately. If you run a NICU, make neonatal capability a line item on the quote.

Gas supply, turbine or compressed air

This matters more than many buyers expect, especially outside large hospitals.

  • Pneumatic ventilators run on piped medical air and oxygen. They need a reliable compressed air supply at every bed.
  • Turbine-driven ventilators generate their own airflow. Hamilton Medical describes the C1 and T1 as needing no compressed air, with an integrated turbine and an oxygen connection. That makes them easier to place in rooms or facilities without piped air.

If your hospital has an unreliable air plant, or you are equipping a field hospital or a facility in a region where medical gas infrastructure is limited, a turbine ventilator can save installation cost. You still need oxygen, from a pipeline, cylinders or concentrators. Check the oxygen connector type too. Hamilton lists DISS or NIST connectors for the C1 and T1, and the wrong fitting can delay a go-live.

Battery and power

For transport, battery life is a key spec. Hamilton lists four hours with one battery for the C1, and four hours with one battery or eight with two for the T1, with hot-swappable batteries. For any model, ask:

  • The rated battery run time, and the age and condition of the batteries on a refurbished unit.
  • Whether batteries are hot-swappable.
  • The input voltage and frequency range, if the ventilator will be used outside the country where it was sold.

Lithium batteries also affect how a ventilator can be shipped by air. Our international buying guide explains why.

Monitoring, modes and consumables

Ask your respiratory therapists and intensivists which modes they use, and make sure the ventilator offers them. Then cost the consumables: breathing circuits, flow sensors, expiratory valves, filters and humidifiers. Circuits and flow sensors are usually model-specific. If you are standardizing a fleet, one platform means one set of consumables and one training program.

If you want end-tidal CO2 or SpO2 on the ventilator screen, check which sensors the unit supports. Ventilated patients are also usually on a bedside patient monitor.

Recalls and refurbished ventilators

Ventilators are life-support devices, so check the recall history of the exact model. The U.S. Food and Drug Administration has posted Class I recalls for Philips Respironics V60 and V60 Plus ventilators, including a 2023 recall involving power management circuit boards. For any refurbished ventilator, search the agency's medical device recall database by model, and ask the supplier for written proof that the corrections that apply to the serial number have been done.

Also ask for:

  • Serial number, software version and operating hours.
  • The preventive maintenance kit history, and when the next one is due.
  • Performance verification and electrical safety check records.
  • Which accessories are included: humidifier, cart, support arm and cables.
  • Whether the manufacturer still supports the model with parts and service in your country.

Our refurbished equipment checklist covers the general questions.

Frequently asked questions

Can a transport ventilator be used in the ICU?

Some transport ventilators offer full ICU-style modes, but they are designed for a different environment. Ask the manufacturer what the device is cleared or registered for, and let your clinical team decide whether it suits long-term ICU use.

What is the advantage of a turbine ventilator?

A turbine ventilator does not need a compressed air supply, so it can run where piped medical air is not available. It still needs oxygen.

How do I check whether a ventilator has been recalled?

Search the U.S. Food and Drug Administration's medical device recall database by manufacturer and model, and check the manufacturer's field safety notices. Ask the supplier for written proof that required corrections were done on the unit you are buying.

Next steps

Browse our ventilators, critical care ventilators and transport ventilators, or request a quote with the models you are considering, patient groups, quantity and the delivery location.

Need a quotation for equipment?

Send us the equipment you need, the quantity and where it should be delivered. We will review your request and respond with available options, pricing and shipping information.