Equipping an Eye Exam Lane: Slit Lamps, Phoropters, Tonometers and More

An eye exam lane is a set of instruments that have to work together: a chair and stand, a slit lamp, a refractor, a tonometer, a chart and a lensmeter, often with a visual field analyzer in a separate room. Optometry and ophthalmology practices opening a new location, adding a lane or replacing worn equipment usually buy several of these at once, and many choose refurbished instruments to keep the cost per lane down. This guide covers what to check for each piece and how to plan the lane as a whole.

Start with the chair and stand

The ophthalmic chair and stand is the base of the lane. The stand carries the slit lamp, the refractor arm and often the chart projector and lights. Examples include the Reliance 7800 NC, Topcon IS-2500, Burton XL-3000, the Topcon OC-2200 chair and the ViewLight Jazz chair and stand.

Before you buy, check:

  • That the stand has the arms and mounts for the instruments you plan to use, and whether a slit lamp table is included.
  • The electrical supply the chair and stand need, and whether they power the instruments on the arms.
  • Floor space and the patient path, including wheelchair access.

Slit lamp

The slit lamp is the instrument doctors use most, so it is worth matching to their preference. Our slit lamps range includes the Haag-Streit BM 900, BM 900 LED and BP 900 with tonometer, the Topcon SL-D2 and SL-8Z, and the Marco G2 Ultra.

Points to check:

  • Illumination. Halogen or LED. LED versions avoid bulb replacement, while halogen units need spare bulbs on hand.
  • Tonometer mount. Some slit lamps are sold with an applanation tonometer fitted. If not, check that the one you want will mount.
  • Imaging. If you want slit lamp photography, ask whether a camera or beam splitter is included or can be added.
  • Power supply. Some slit lamps use a separate power unit, so confirm it is included.

Refractor and autorefractor

A manual refractor (phoropter) is still standard in most lanes. Examples are the Reichert Ultramatic RxMaster, American Optical 11625, Shin-Nippon plus cylinder and Marco RT-1. The key choice is minus or plus cylinder. Ask each doctor which convention they refract in, because a refractor in the wrong convention slows every exam.

For the pre-exam workup, an autorefractor or auto kerato-refractometer such as the Topcon KR-8800 gives a starting point before subjective refraction.

Tonometer and infection control

Our tonometers include Goldmann-type applanation tonometers, such as the Haag-Streit AT 900 and Haag-Streit 870, and non-contact tonometers such as the Canon TX-20.

Contact tonometry raises an infection control question. The U.S. Centers for Disease Control and Prevention's guidance on preventing epidemic keratoconjunctivitis (EKC) notes that EKC, caused by adenoviruses, has been linked to equipment used during eye exams. For instance, CDC says to wipe clean and disinfect tonometer tips for 5 to 10 minutes in either 5,000 ppm chlorine or 70% ethyl alcohol, compatible with the instrument and approved by its manufacturer, then rinse and air dry. It also notes that data suggest 70% isopropyl alcohol is not effective against adenovirus. Budget for spare tonometer prisms, so one can be disinfecting while another is in use, or for disposable tips if your doctors prefer them.

Charts and lensmeters

Visual acuity charts can be projected, such as the Topcon ACP-7, Marco CP-600 or Ray Vision CP-300B. Measure the lane first: a projector needs the right distance to the screen, or a mirror setup in a short room. Check that the projector comes with the slides or charts your doctors use.

A lensmeter reads the prescription in the patient's current glasses. Manual units such as the American Optical 12603 are simple and durable. Automatic lensmeters such as the Grand Seiko GL-7000 and L&W Optics TL-6000 are faster for busy optical departments. Our lensmeters and projectors page lists both.

Visual field analyzer

For glaucoma care, a visual field analyzer is usually the most expensive single instrument after the lane itself. The ZEISS Humphrey Field Analyzer is a common choice, and refurbished units such as the Humphrey HFA 745i and 750i are listed in our visual field and screening range. ZEISS says the Guided Progression Analysis function on its current HFA3 can use SITA tests taken on any HFA instrument, which helps practices that will keep older data. Ask what software version a refurbished unit carries and which tests are installed, and whether it can export to your records system.

Buying refurbished ophthalmic equipment

Most of the instruments in our ophthalmic equipment range are refurbished. For each piece, ask:

  • Model, serial number and what was cleaned, adjusted or replaced.
  • Optical condition: scratches, haze or fungus on lenses and mirrors.
  • Whether calibration was checked, especially on tonometers and lensmeters.
  • Which accessories come with it: breath shields, chin rest papers, power supplies, slides and dust covers.
  • The input voltage, if the lane is being shipped outside the United States.

Our refurbished equipment checklist covers the general questions.

Frequently asked questions

What equipment do I need for one eye exam lane?

A typical lane has a chair and stand, a slit lamp, a refractor, a tonometer, an acuity chart or projector and a lensmeter. Many practices add an autorefractor for the pre-exam workup and keep a visual field analyzer in a shared room.

Minus or plus cylinder phoropter?

Buy the convention your doctors refract in. Ask each doctor before ordering, because switching conventions slows the exam.

How should applanation tonometer tips be disinfected?

Follow the tonometer manufacturer's instructions. CDC's EKC guidance describes wiping and then disinfecting tips for 5 to 10 minutes in 5,000 ppm chlorine or 70% ethyl alcohol, then rinsing and air drying.

Next steps

Browse our ophthalmic equipment, or request a quote with the number of lanes, the instruments for each lane, new or refurbished, and the delivery location.

Need a quotation for equipment?

Send us the equipment you need, the quantity and where it should be delivered. We will review your request and respond with available options, pricing and shipping information.